Home > Error Codes > Dlg Error Codes

Dlg Error Codes


The cable is loose, broken, or not plugged in. Replace Drive 358 DAM 10+ Data Address Mark. and more errors won't crop up in the future?Click to expand... Drive should be replaced. http://thewebparrots.com/error-codes/dp-150-error-codes.php

EDIT2: Different drive worked, but had bootup problems. :X Last edited: Nov 10, 2010 Cerulean, Nov 10, 2010 Cerulean, Nov 10, 2010 #2 Nov 10, 2010 #3 drescherjm [H]ardForum Junkie Re-test with appropriate diagnostic utility 222 Drive Failed the Test The drive has failed the SMART test. An error has been detected. Re-Test Drive 103 Write Fault Error A Write command during the test has failed to complete. https://support.wdc.com/KnowledgeBase/answer.aspx?ID=11711

Read Element Failure

The drive has to be replaced. Replace Drive 357 DAM 2-9 Data Address Mark. The drive is defective. Check cabling and retest.

Create and use a new DLG Tools diskette. This may be due to a defect. This may be due to an internal error or to a failed connection which did not allow the interrupt command to be sent to the drive properly. Smart Error Codes This may be an anomaly.

How to fix Dlg Dll errors. What are Dlg Dll errors? Smart Status Not Available The automatic repair feature can attempt a repair if possible. After running an extended test, it gave error code 0223. http://answers.microsoft.com/en-us/windows/forum/apps_windows_10-winapps/windows-10-error-code-0x0070003-dlg-apps/494ef9ca-e777-47ba-a2b9-5bbf04f8ac16 Re-test Drive 150 UNKNOWN ERROR An unknown error has occurred during testing.

If ECC occurs, use Data Lifeguard repair option for additional error correction. Smart Status Failed Wd Replace Drive 458 IDNF 10+ Identified Data Not Found. Retest the drive. Replace the drive if the error repeats.

Smart Status Not Available

Replace Drive 210 Self Test Incomplete SMART Self Test failed to complete (e.g. -- timed out). https://community.wd.com/t/error-codes/162277 Re-Test Drive 108 Seek Not Complete A Seek command did not complete in the time allotted. Read Element Failure There may be repairable media errors on a platter. Too Many Bad Sectors Detected Fix Return to Top Data Lifeguard Tools 5.22 for DOS Error Codes Note: If the same error code is encountered more than once after re-testing, please Contact Us for additional assistance.

Drive should be replaced. Check This Out Re-test with appropriate diagnostic utility 228 DRIVE IS LOCKED-DST FAIL Security feature of the drive reports locked status. The Identify Drive Command has not received an acceptable response from the drive. Re-Test Drive 107 Check Sum Error Accumulated test data on the drives is corrupted. Status Code = 07 (failed Read Test Element)

If ECC occurs, use Data Lifeguard for additional error correction. Please contact the system vendor for the above-mentioned information. Drive should be replaced. http://thewebparrots.com/error-codes/dun-error-codes.php Drive should be replaced.

Check connections and retest. Data Lifeguard Tools The drive should now be defect free. Any help would be greatly appreciated.

Replace Drive 200 Drive Not Tested Supported WD drives are initialized with this status.

Check the device connections. To obtain a descriptive text for a Eloquence error code you can use the ERRMSG$ function. Check cable and retest. Gsmartcontrol Re-Test Drive 116 IDNF Error Address Not Found Error.

Track 0 on the drive must be accessed to perform parts of various internal tests. An interrupt command to perform a specific task failed to complete. This error may have internal and external reasons. have a peek here Drive should be replaced.

Note: This guide was previously published as WIKI_Q494479 What exactly is Shdoclc.dllpreview.dlg error code? The failure to complete the test indicates a failed drive. Check cabling and retest. Monitor the smart data to see if the drive is reporting more bad sectors or other problems over time.

Replace Drive 457 IDNF 2-9 Identified Data Not Found. This may be an anomaly or a defect with the drive. Please ensure that you are using the version of diagnostic utility corresponding to either newer or older Western Digital drives. Check cable & retest.

Some of those possible events include improper deletion of applications and hardware and incomplete installations or uninstallations. Data sent between the host computer and the drive has been corrupted. Re-Test Drive 11 Cable Test Failed Failure during cable test. Drive should be replaced.